Ball-Type Grease Nipples Type E (K2a) drive-in DIN 3402 90° Galvanized
Ball-Type Grease Nipples Type E (K2a) drive-in DIN 3402 90° Galvanized
Zinc-plated steel.
Ball-type nipples are suitable for all standard lubrication points, which have to be frequently lubricated in a reliably way. They are more and more often replaced by hyraulic-type grease nipples according to DIN 71412 due to their manifold application purposes.
- Description
- Reviews (0)
- Fırça PDF Teknik Tablo
Description
Ball-Type Grease Nipples Type E (K2a) drive-in DIN 3402 90° Galvanized
VERSIONS
In general, our ball-type grease nipples according to DIN are made of steel, zinc-plated and passivated, and they are featured with a tapered thread.
The head diameter is 6.5 (-0.2) mm /0.256″ – 0.008″.
We offer various standard types also in brass or stainless steel V2A/V4A. Of course, our ball-type grease nipples are also available in different angle versions, or as drive-in type.
There is a SARK HIRDAVAT Grease Nipple for every application purpose in most sizes, types and composition. With a range of more than 1,500 different types of nipples with about 70 different thread forms we offer the largest product line worldwide.
Depending on the application and the installation sizes, we can manufacture grease nipples according to international standards. Other than a standard version made of steel, zinc-plated and passivated, we offer many other types, made of brass or stainless steel
Upon request, SARK HIRDAVAT manufactures ball-type nipples in further versions, with respect to e.
dimension
material
thread size
thread form (e. g. with cylindrical thread)
different opening pressure
surface colour (e. g. yellow passivated)
further surface treatment
etc.
Reviews
There are no reviews yet.